Wood Planter Tutorial

Miniature Wood Planter Tutorial

My life has been busy with laughs and giggles.  We had our grandchildren here for a week to give Mom and Dad a little break.  So here is a little down and dirty quick tutorial for a wood planter box for the garden.  Read on through til the end,  I have a question for you.

Supplies:

  1. wood glue
  2. x-acto knife and cutting mat
  3. ruler
  4. chop it (optional)
  5. slim sticks wood  (7.5″ x 1/16″)
  6. 1/16″ square bass wood
  7. sand paper or emery board

Make sure your x-acto knife or chop it has fresh blades to cut with.  I used the chop it  for most of my cuts and as you can see my little chop it has been used so much that I have had to add a piece of cutting mat under my blade as wood had been chipped away.  I have been looking at wood miter shears as an addition to my tool chest.  Just haven’t made a decision on the brand yet.  Any recommendations?

chop itwood miter cutter

Cut four pieces of the 1/16″ square bass wood 7/8″ in length.  These are your corners.  I used the chop it to cut mine.  Use your ruler to set up the guide and get almost perfect matching lengths.

planterchopitruler.jpg

 

Then cut 16 pcs of the slim sticks into 1″ lengths.  Glue 3 pcs together  four times.  These are the sides of the planter.  Glue 4 pcs together for the bottom of the planter.

Plantercutsready_Copy1.jpg

Use sand paper or emery board to even up the sides if necessary.

Next glue two posts on one side on two of the sides.  Having the top edge even.  As seen below.

 

Plantersidesglued_Copy1.jpg

Turn one side over and run a bead of glue down the post from the top to the bottom edge of the side panel.

Add two sides at a 90 degree angle.

plantersidesinplace (2)_Copy1.jpg

Glue four pcs of the slim stick to form the bottom of the planter.  Add glue to the three edges and place the bottom in.

Plantersidesinplace_Copy1plantergluereadyforbottom_Copy1plantertopviewbottominplace_Copy1.jpg

Glue on final side panel.

planterssidebyside_Copy1.jpg

Next cut four pieces of the slim sticks 1 5/8th” in length.  We are going to make the window frame top.

I can never get a good 45 degree angle using my chop it.  I always seem to get a better result using my cutting board and x-acto knife.

Line up one of the slim sticks along the guide line.

planterframelinedup_Copy1.jpg

With the corner right at the 45 degree line.  Use your x-acto knife to cut the angle.  Flip the piece over and trim the other side.

planterframeflip2cut_Copy1.jpg

Do this to all four pcs of the frame.  Align to dry fit together.  Use sandpaper or emery board to adjust fit if necessary.  Glue together.

planterwindowframedryfit_Copy1.jpg

add glue to the top edge of the planter box top and glue the frame to the top.  Fini

plantertopglue_Copy1.jpg

Planter box_Copy1

Fini…now you can finish as you please.  A thinned out burnt sienna acrylic wash makes a good red wood stain for the wood.

Here are the flowers that made for filling the planter.  Do you want a how to on them?

Planterboxflowers_Copy1.jpg

Have Fun

Planterboxkitty_Copy1.jpg

Hoping to have bicycle, fan and boat tutorial coming soon…which first?

14 thoughts on “Miniature Wood Planter Tutorial

  1. Good morning bicycle sounds good!! And would love to make the flowers too please don’t forget about elf on the shelf !! Your tuts are really fantastic thank for sharing with us . 😊

    Like

  2. Thank you so much for this. I have to confess I was beginning to have “Teensyweensy” withdrawals.
    Great planter. Love the flowers ( look like anemone flowers?).Would love to see your tutorial.
    Sweet kitty and butterfly.
    . Seriously??? A bicycle please. 🙂

    Like

    1. I know ….I was running late again on posting. I will try to be better to prevent withdrawals! 😉 LOL The bicycle has been cycling around in my head for over a year now….vintage with a basket that can hold flowers or small pet.
      🙂

      Like

      1. By the way, I have the Easy Cutter. I got it several years ago. By far one of my favorite tools. It has gotten me through all the floors and trim in 2 large houses, a toy shop and The Buttercup cottage kit countless frames, and it’s just now starting to dull.
        Looking forward to seeing more of your amazing ideas!

        Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s