Baby Bottle Tutorial

Miniature Bottle Tutorial

All my little fur babies need an occasional bottle feeding and so here is a simple tutorial to make a cute little bottle.

Supplies needed:

  1. Bic Pen
  2. clear acetate
  3. glue (I used gorilla glue)
  4. exacto knife
  5. white gel food color
  6. sculpey mold maker and red marker
  7. card stock paper for trimming
  8. sand paper

Take apart the bic pen.  We will be using the clear part of the pen.

IF

Cut a section of the pen approximately 3/4″.  Be sure to use a portion of the pen that doesn’t have any holes or logo.

IF

I used my exacto knife.  Sand to even out your edges.

IF

Cut a circle out of the clear acetate that will fit onto the bottom of the clear tube.  Glue in place at the bottom of the clear tube.

IF

 

Take a small portion of the sculpey mold maker and touch the clay with a red marker.  Blend together.  The red marker will tint the sculpey mold maker pink.  I use the sclupey mold maker clay because it will cure soft and rubbery.    Shape your bottle nipple top.

IF

Make sure you make the inside of the nipple concave.   Cure per the instructions.

Mix up a solution of water with a tiny bit of the white gel food coloring and fill your bottle. Not all the way…about half way.

Glue the bottle top nipple to the top of the bottle.

IFIFIF

IF
Sorry the pictures are blurry

Cut paper stock to make trimming for the top and bottom in your color choice and glue to the bottom and top edges.  This hides the glue connections.

Ta da…little bottle for your babies.

Lamb Bottle

 

 

 

8 thoughts on “Miniature Bottle Tutorial

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s